Apex & Attak Accessories

RX-1 & RX Warrior Accessories

RS Vector & RS Rage & Nytro Accessories

FX Nytro Accessories

Phazer Accessories

Yamaheater Warm Hands Controller:

• Boost the warmth of your Yamaha Phazer, RS Vector, FX Nytro, RX-1, and Apex models!

• This unit modifies the voltage maintained at the handlebar grips without harming or overloading the OEM ECU!

• No more freezing hands!  Simple plug & play installation!

• $175

Digital Water Temp Gauge Kit:

• This compact size digital gauge clearly indicates actual water temperature.
  Switchable from Fahrenheit to Celsius, and has green backlighting.
  Velcro mounting makes instant installation on any flat surface a snap.
  Includes clock feature (it is set in military time) & charges internal battery from sled.
  A sending unit adaptor is also included. This allows you to tap into
  any coolant line. Includes clamps.

• Installation instructions can be found here Water Temp Kit!
   

• $125
  
  ***Click on image for larger picture***

Windage Plate Kit:

• Kit includes a plate for both the movable and stationary sheave of the secondary.
  Also includes 12 screws for fastening the plates to the secondary. 
  Customers have seen as much as 1.5 mph increase in top speed!!
  Goes great with any Ulmer Racing clutch kit!!
   

• $35

4-stroke Wrench Set:

• A must have for working on your Yamaha 4-stroke.  This kit includes a 4mm & 5mm ball-end allen wrenches which will allow easy removal of many fasteners on your 4-stroke!  Perfect for any tool kit!
   

• $12.50 single wrench

• $22 pair

Clutch Center-to-Center and Offset Tool

• Center to center and offset all in one.  These easy to use and cost effective tools set the standard for the industry.  The tool design slips over the fixed sheave of the primary and allows hands free operation for checking offset.  The center to center can be checked with the primary clutch on the machine or removed.  Incorrect center to center distance or improper secondary offset is often a major cause of poor clutch performance and greatly reduced belt life.  This two-in-one tool is by far the easiest to use and will save you time and frustration when setting up these important measurements. 

• User instructions can be seen here Clutch Tool!
   

• $45

Primary Clutch Puller:

• Easy removal of your primary clutch this works on all Yamaha primary clutches from 1997 and newer. 
   

• $30

Quick Change Belt Tool:

• Easy removal of your belt when using stiff secondary springs. 
   

• $35

4-Stroke Tether Chord:

• A normally closed tether chord for all RX-1/Warrior, RS Vector/Rage/Nytro,
  Apex/Attak, Phazer, and FX Nytro models. 
   

• $35

Track Rub Eliminator Kit:

• This is for the short track monoshock models in which some have experienced track rubbing.
  A simple set of rollers and a longer bolt to providing some protection to the top of the shock body!
  This will allow you to stud completely across the center of the track!
  A must have for all 121” monoshock suspensions! The kit includes two rollers, and a bolt.

• Installation instructions can be seen here Track Rub Kit!
   

• $25
  
  ***Click on image for larger picture***

Apex/Attak, RX-1/Warrior, RS Vector/Rage Oilite Front End Bushing Kit:

• Replaces all the front end bushings in the front end of your 2004 and newer Yamaha 4-stroke!

• Fits 2004-2005 RX-1/Warrior, 2005-2010 RS Vector/Rage, 2006-2010 Apex/Attak models!

• Kit Includes:
  -4 lower bulkhead bushings
  -4 upper bulkhead bushings
  -4 upper a-arm bushings
  -4 lower a-arm bushings
  -4 upper spindle bushings
  -4 spindle housing bushings
   

• $135

***Click on image for larger picture***

Apex/Attak, RX-1/Warrior, RS Vector/Rage Replacement Drive Axle:

• A new OEM replacement drive axle with your choice of 8 tooth or 9 tooth extrovert drivers installed!

• Over time the drive axle sees repeated stress and can crack & break, replace yours and upgrade to extrovert drivers!

• Standard OEM axle (1.0625" hex size) with extrovert drivers installed: $302

• Heavy Duty axle (1.25" hex size) with extrovert drivers installed: $362

FX Nytro/Phazer  Oilite Front End Bushing Kit:

• Replaces all the front end bushings in the front end of your 2007 and newer Yamaha 4-stroke!

• Fits 2007-2008 Phazer and 2008 FX Nytro models!

• Kit Includes:
  -4 upper a-arm bushings
  -8 lower a-arm bushings
   

• 2007-2009 Phazer $75

• 2008 FX Nytro $75

• 2009 FX Nytro $86

***Click on image for larger picture***

FX Nytro Adjustable Transfer Blocks:

• These will require no strap adjustments for adjusting transfer on your new FX Nytro.

• Completely adjustable with the turn of the wrench you can adjust the transfer up to 3/8" total.

• Includes 2-bolts, 2-nuts, 2-transfer blocks

• Installation instructions can be seen here Transfer Blocks!
   

• $55
  
  ***Click on image for larger picture***

FX Nytro Trail Tank

• 10 gallon capacity (increasing capacity by over 2 gallons)

• Uses OEM fuel cap

• Includes new O-ring for fuel pump assembly

• Thumb Screw fasteners for easy side panel & hood removal

• Includes instructions
   

• $325
  
  
  ***Click on image for larger picture***

FX Nytro Replacement Drive Axle:

• A new OEM replacement drive axle with your choice of 8 tooth or 9 tooth extrovert drivers installed!

• Over time the drive axle sees repeated stress and can crack & break, replace yours and upgrade to extrovert drivers!

• Standard OEM axle (1.0625" hex size) with extrovert drivers installed: $362

• Heavy Duty axle (1.25" hex size) with extrovert drivers installed: $422